• pilot450-sla-3dprinter-02
  • uniontechpilot450part1-600×600
  • uniontechpilot250geometrymodel-600×600
  • uniontechpilot450part5-600×600
  • uniontechpilot250recliningchairmodel-600×600
  • uniontechpilot250wing-600×600
  • uniontechpilot450part3-600×600
  • uniontechpilot450part2-600×600
  • uniontechpilot250engineeringparts-600×600
  • pilot450-sla-3dprinter-02
  • pilot450-sla-3dprinter-01
  • pilot250-sla-3dprinter-03
  • pilot250-sla-3dprinter-01

UnionTech Pilot Serija

Industrijski SLA 3D Štampač

  • Može da koristi bilo koji SLA materijal
  • Delovi odličnog kvaliteta sa minimalnom potrebom završne obrade
  • Niski troškovi održavanja i korišćenja
  • Potpuno automatsko nadgledanje svih parametara uređaja
Категорије: ,

Опис

Pilot250 Technical Data

Build Volume 250 × 250 × 250 mm ili 450x450x450mm
Accuracy Dimension <25.4 mm: ±0.025 mm

Dimension ≥25.4 mm: ±0.1% x Dimension

Layer Thickness 0.05-0.25 mm
Laser 355 nm, solid-state frequency tripled

Nd: YVO₄

Beam Size 0.06-0.08 mm
Material Compatible with commercial available resins for 355 nm stereolithography
Scanning Speed 6-10 m/s
Controlling Software UnionTech™ RSCON
Data Preparation Software Polydevs
Operation System Windows 10
Input File Format .usp
Network Type and Protocol WiFi, Ethernet

Using MQTT, HTTP, TCP

Electrical Requirements 200-240 VAC, 50/60 Hz, Single phase
Rated Power 2.4 kVA
Systems Control Closed-loop
Temperature Range 22–26 °C
Maximum Change Rate 1 °C/hour
Relative Humidity < 40%
Resin Vat Manually Replacing
Processing and Finishing Post-Curing Unit (optional)
Warranty 12 Months